15,00 €
VAT included
Availability: 61 in stock
Lista dei desideri
Shipping costs: 6,00€
30 Days to return the product
100% Secure Payments
Share on
Hardware: V1.5 Software: V2.1
Wireless scanning tool.
Bluetooth 2.0 connection, no batteries, cables, or switches.
Wireless (bluetooth) 5 ~ 10 metres.
Can also be used with a PC with a bluetooth card.
Supported protocols:
ISO9141 (5 baud init, 10.4 Kbaud)
ISO14230-KWP (5 baud init, 10.4 Kbaud)
ISO14230-KWP (Fast init, 10.4 Kbaud)
ISO15765-CAN (11bit ID, 500 Kbaud)
ISO15765-CAN (29bit TIN ID, 500 Kbaud)
ISO15765-CAN (11bit ID, 250 Kbaud)
ISO15765-CAN (29bit TIN ID, 250 Kbaud)
The following operations can be performed
1. Reads diagnostic trouble codes, both generic and manufacturer-specific, and displays their meaning (over 3000 generic code definitions in the database).
2. Delete trouble codes and switch off the MIL ("Check Engine")
3. Display current sensor data, including: RPM
4. Engine
5. Calculated load value
6. Coolant temperature
7. The state of the fuel system
8. Vehicle speed
9. Short fuel life
10. Long fuel life
11. Pressure intake manifold
12. Timing advance
13. Intake air temperature
14. Air flow rate
15. Throttle position
16. Oxygen sensor voltages / Associated short time COMBUSTIBLE provisions
17. Fuel system status
18. Fuel pressure regulator and many more …
Supported operating systems: Windows XP, Windows 7/8, Android, Symbian.
Bluetooth password: 0000/1234/6789
ELM327 Bluetooth configuration manual for Android:
- Connect the ELM327 interface to the OBD-II adapter in the vehicle.
- Start the vehicle or at least have the ignition switch on.
- The OBDII socket is normally located under the steering column or on the dashboard, about 3 feet away from the driver.
- Locate and activate Bluetooth on your smartphone, tablet or Android car radio.
- Click the Settings icon, and then click Bluetooth Settings.
- Search and find the new hardware.
- It may be displayed as 00: 13: EF: 00: 0A: 69 or similar, but it will be resolved in OBD-II or similar.
- If the scan results come up empty, disconnect the interface and reconnect it, and make sure you are within range of the Bluetooth signal transmission. If this continues, try it on another vehicle.
- After the OBD-II interface has been located, pair using the code: 0000, 1234 or 6789.
