Certificates: CE / FCC / RoHS

EcoOBD2: great for lowering fuel consumption and co2 emissions.
EcoOBD2 is a Plug & Drive ready device.
EcoOBD2 is easy to install. Just plug it into the cars OBD2 connector.
EcoOBD2 fits all cars from the year 1996 onwards.
It works with OBD2 protocols such as remapping the car’s computer control unit. After driving a total of 200 km, EcoOBD2 adapts the car
according to the driver’s habits and always continues remapping the ECU to save fuel and co2 emissions.

What does EcoOBD2 do?
According to your driving habits, EcoOBD2 creates a new map in the car’s computer control unit to reduce the vehicle’s fuel consumption.
As you drive more KM/mile, EcoOBD2 renews the map and adapts to fit your car for greater fuel economy.

What is the EcoOBD2 add-on unit?
EcoOBD2 is an add-on unit that can be connected to your car’s OBD2 connector to reduce your car’s fuel consumption.
When connected to the OBD2 connector, EcoOBD2 receives information from the car’s computer ECU. With the data received from the ECU,
EcoOBD2 adjusts boost pressure, fuel quantity, injection time and pressure to reduce your car’s fuel consumption.
The EcoOBD2 add-on ECU does not exceed the manufacturer’s requirements. It only works within the tolerance of the engine.
EcoOBD2 uncovers your car’s hidden power.
EcoOBD2 does not damage the car’s engine and computer control unit or cause any negative effects to the car’s factory settings.
EcoOBD2 does not change any settings permanently. To return to the car’s original settings, simply disconnect EcoOBD2 from the OBD2 connector.

EcoOBD2 uncovers the hidden power of your car.
– Up to 15 % fuel savings

EcoOBD2 is very easy to use.
Connect EcoOBD2 to your car’s OBD2 connector. And turn on the ignition for 30 seconds. And start the engine.
The EcoOBD2 settings are optimal and best for your car. The parameters are also different for each vehicle,
you may not need to make any further changes.
EcoOBD2 will recognise your vehicle and your driving habits after about 200 km / 150 miles of driving, and then EcoOBD2 adapts perfectly to your car.

EcoOBD2 works on the basis of changing the shape of the ECU signal. As a result, it changes the entire injection map.
The main difference between the EcoOBD2 Chip Tuning Unit and the remapping tuning methods is that the EcoOBD2 Chip Tuning Unit is easily removable,
and after disconnection it returns to the factory settings. EcoOBD2 is the economical and safe type of tuning. Remapping is a permanent modification to your car.
This is expensive tuning and cannot be removed.
EcoOBD2 has an engine protection function and is 100 per cent safe for your car’s engine.
EcoOBD2 manufactured on the PCB using SMD technology. The EcoOBD2 chip tuning boxes are of high quality.

Installation and calibration:
1 – Remove the car key from the ignition.
2 – Find the OBD2 connector (*) in your car and connect EcoOBD2
3 – Insert the key into the ignition and turn the key to the first stage. (Do not start the car)
4 – Press the reset button for about 5 seconds. After releasing the button, wait a few moments for about 30 to 54 seconds. (EcoOBD2 will communicate and establish a connection with the ECU)
5 – Start the engine.
6 – EcoOBD2 will recognise your vehicle and your driving habits after about 200 km / 150 miles of driving and then EcoOBD2 will adapt perfectly to your car for better fuel economy.

Does your car have an OBD2 connector?
On-board diagnostics, or ‘OBD’, is a computer-based system incorporated into all vehicles and trucks from 1996 and later,
as required by the Clean Air Act Amendments of 1990. OBD systems are designed to monitor the performance of some
of the major components of an engine, including those responsible for emission control.

OBD2 necessarily for cars:
– Sold after 1 January 1996 in the United States
– Sold after 1 January 2001 in the European Union
– With diesel engine sold after 1 January 2003

(*) Where is the OBD2 connector located in your car?
1 driver’s side, under the dashboard, in the area under the steering wheel
column,
2 Driver’s side, under the dashboard, between the driver’s side door and the steering column area
3 Driver’s side, under the dashboard, between the steering column area and the centre console
4 Driver’s side, dashboard/instrument area, between steering column and centre console
5 Driver’s side, dashboard / instrument area, between driver’s side door and steering column
6 Centre console, vertical surface to the left of the vehicle centre line
7 Centre console, vertical surface to the right of the vehicle centre line or passenger side of the centre console
8 Centre console, horizontal surface in the front passenger area.

Package contents:
1pc x Interface NitroOBD2 Chip Tuning Box
1pc x User Manual in English